We offer a wide range of gasket (jointing) sheets. They are used for production of technical sealing of various media. Our gasket sheets are applied in a wide range of pressures and temperatures among others in steam and hot water installations, different kinds of other liquids, gases, oils, chemicals etc. Non-asbestos gasket sheets are a mix of aramid fibres, minerals fibres, organic fibres and elastomers carefully selected for specific working conditions.
Depending on applications we offer our sheets without or with wire insertion – metallic (metal gauge centre). They can be produced in different colours in accordance with customers` requirements. According to their demands our gasket sheets could be additionally covered one-side by teflon (PTFE) anti-stick coating and/or one-side or double-side graphite coating.
Our sheets are good equivalents to products of well-known world manufactures and they are offered at very attractive prices.
Standard sheet sizes:
1500 x 1500 mm, 1500 x 3100mm, 1500 x 1000 mm,
1500 x 2000 mm, 1270 x 1270 mm, 1270 x 1905 mm,
1270 x 3810 mm, 3200 x 3200 mm, 1000 x 100 mm
Thickness: 0,25 do 6,00 mm (for non-metallic range)
0,80 do 6,00 mm (for metallic range)
< or = 1 mm = +/- 0,10 mm; > or = 1 mm = +/- 10 %;
– length: +/- 50 mm lub 5 %
– width: +/- 50 mm lub 5 %
Max. value of temperature and pressure should not be used simultaneously, they are given only as guidance.
Max. temperature and pressure depends not only on the type of gasket material but also on the application condition such as thickness of material, nature of service medium, type of flange, surface, stress etc.